The CodeCell C6 Drive, as overviewed by microbots, is a compact all-in-one robotics module designed to streamline the development of intelligent machines. Measuring just 22.5mm x 18.5mm x 9.4mm and ...

Before we start, I want to point out that there are two connectors for the USB A to micro USB cable that connects the robot to your computer. One is for connecting to the Arduino Nano RP2040 Connect ...

Configure your ESP32 Drone in Betaflight and fly it with your favorite Radio Controller using esp-fc firmware by rtlopez. With the ESP32 as a drone flight controller configured in Betaflight, you save ...

This IoT Fall Detection System provides a proactive solution, ideal for those seeking to enhance the safety of loved ones or individuals at risk of falls. Falls pose a serious risk, particularly for ...

Build a miniature DIY FPV drone that operates fully on Arduino hardware for a fun learning experience and thrilling living room racing. Embark on an exciting journey into the realm of micro-sized ...

Arduino Nano 33 BLE Rev2 is an update to the Arduino Nano 33 BLE board launched in 2019 that features two IMU sensors instead of one with the BMI270 6-axis accelerometer and gyroscope and the BMM150 3 ...

The updated 'Unified' sensor driver (based on Adafruit's Sensor API) use I2C to communicate. If you need to use SPI on the L3GD20, please look at the original (non ...

Makeblock Ultimate 2.0 is an educational robot kit that can be used to easily create up to 10 different types of robots. An Arduino-compatible Mega 2560 MCU board serves as the main controller and ...

* some of the MPU6050-raw-data-extraction code in void loop() and most in calculateError() are written by Dejan from: * https://howtomechatronics.com/tutorials ...

The MPU6050 module has a total of 8 pins, of which at least 4 pins are necessary for the interfacing. VCC provides power for the module. Connect to the 5V pin of the Arduino. GND Ground is connected ...